Product Catalog

 

LIFETIME WARRANTY LRS series 12V 3A CCTV switching power supply 

35W SMPS 220V ac to 12V dc LED power supply 

 

MODEL		LRS-35-5	LRS-35-12	LRS-35-24
OUTPUT	DC VOLTAGE	5V	12V	24V
	RATED CURRENT	7A	3A	1.5A
	CURRENT RANGE	0-7A	0~3A	0~1.5A
	RATED POWER	35W	36W	36W
	RIPPLE & NOISE	100mVp-p	120mVp-p	150mVp-p
	DC VOLTAGE ADJ. RANGE	±10%	±10%	±10%
	VOLTAGE TOLERANCE	±3%	±2%	±1%
	LINE REGULATION	±0.5%	±0.5%	±0.5%
	LOAD REGULATION	±2%	±0.5%	±0.5%
	SETUP, RISE, HOLD TIME	800ms,30ms,30ms/230VAC(full load)
INPUT	VOLTAGE RANGE	100~240VAC ,127~373VDC(Withstand 300VAC surge input for 5 second)
	FREQUENCY RANGE	47~63Hz
	AC CURRENT	0.7A/115VAC 0.42A/230VAC
	EFFICIENCY	83%	86%	88%
	INRUSH CURRENT	Cold start 45A/230VAC
	LEAKAGE CURRENT	<0.75mA/240VAC
PROTECTION	OVER LOAD	Rated output power110%~150% Start overload protection
		Protection type:hiccup mode,auto-recovery after fault condition is removed
	OVER VOLTAGE	Rated output power115%~135% Start over voltage protection
		Protection type:cut off the output,auto-recovery after fault condition is removed
ENVIRONMENT	WORKING TEMPERATURE	-30℃~+70℃(Please refer to“derating curve”)
	WORKING HUMIDITY	20%~90%RH Non-condensing
	STORAGE TEMP,  HUMIDITY	-40℃~+85℃;10%~95%RH Non-condensing
	WITHSTAND VIBRATION	10~500Hz,3G 10min./1Cycle,Period for 60min,Each axes
SAFETY	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25℃/70%RH
FIT STANDARD	SAFETY STANDARD	Compliance to UL60950-1,TUV EN60950-1,GB4973
	EMC STANDARD	Compliance to EN55022(CISPR22)Class B,GB9254 Class B,EN55014,EN61000-3-2,3
	EMC IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024,EN61000-6-1
OTHERS	DIMENSION	99*82*30(L*W*H)
	WEIGHT	0.23kg
	MTBF	≥720K hrs min. MIL-HDBK-217F(25℃)
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
	3. Tolerance : includes set up tolerance, line regulation and load regulation.